Mortgage refusal after a survey flags foam
We extract the foam, record moisture readings before and after, and issue a signed report with photographs. Lenders and solicitors across Grimsby accept our paperwork without a second inspection.
Extraction, cleaning and ventilation restored across North East Lincolnshire
Cavity Wall Spray Foam Removal in Grimsby done right
Cavity Wall Spray Foam Removal in Grimsby is what we do every week for homeowners, landlords and buyers across North East Lincolnshire. If spray foam was pumped into your cavity and it is now trapping damp, blocking ventilation or holding up a mortgage, we extract it, clean the cavity and leave the wall able to breathe again. cavity wall spray foam extraction Grimsby homeowners can book the same day.
Careful work. Honest options.
About this service
Cavity Wall Spray Foam Removal in Grimsby explained
Cavity Wall Spray Foam Removal in Grimsby is the controlled extraction of polyurethane foam, open cell foam or closed cell foam from the gap between your inner and outer leaf. We cut the foam out with a spray foam cutting saw and oscillating multi-tool, pull the loose material with an industrial vacuum, then inspect the cavity with a boroscope camera to confirm nothing is left bridging the two skins. A moisture meter goes in before we start and after we finish, so you can see the timber and plasterboard readings drop.
Most Grimsby jobs we take on come from one of three situations: a surveyor flagged spray foam on a mortgage valuation, damp and condensation started showing on an internal wall, or a loft conversion revealed foam that had crept down into the cavity. Grimsby's older terraces around East Marsh and the West Marsh were never designed for closed cell foam, and the coastal damp off the Humber makes trapped moisture worse. If you have been searching cavity wall spray foam removal near me Grimsby, we cover the whole town and the villages out to Immingham and Keelby.
- ✓ Mortgage and survey cleared
- ✓ Damp and condensation stopped
- ✓ Ventilation restored
- ✓ Heating bills back under control
What's included
What our cavity foam removal includes
Every cavity extraction we carry out in Grimsby includes the survey, the extraction itself, the clean-up, the disposal and the written report. There are no hidden extras for the inspection kit or the paperwork. If the job needs dry ice blasting or sand blasting equipment on bonded foam, that is quoted at survey so you know before we start.
✓
Free cavity survey
We take moisture meter readings, inspect the cavity with a boroscope camera and confirm the foam type. You get a fixed written price the same day, with no charge for the visit.
✓
Controlled extraction
Foam is cut in sections with a spray foam cutting saw and oscillating multi-tool, then pulled out with an industrial vacuum. Dust is contained with an air scrubber and doorway seals.
✓
Cavity clean and verify
We clear every fragment, re-inspect with the boroscope camera and re-test moisture levels. Any bonded residue is removed with dry ice blasting or controlled sand blasting equipment.
✓
Licensed waste disposal
All foam and debris is bagged and removed through licensed waste routes. You do not need to arrange a skip or deal with the material yourself.
✓
Completion report
A signed report with before and after moisture readings, photographs of the empty cavity and a description of the method used. This is the document lenders and solicitors ask for.
How it works
How our Grimsby extraction process runs
01
Survey and quote
We visit, take moisture meter readings, and inspect the cavity with a boroscope camera through the air bricks or a small drilled access point. You get a written price the same day. Most Grimsby surveys take 45 to 60 minutes and there is no charge for the visit.
02
Set up and protect
We sheet floors, seal doorways and set up an air scrubber so dust stays contained. Respirators and protective clothing go on before any cutting starts. On a typical semi this setup takes about 30 minutes and you can stay in the house while we work.
03
Cut and extract
Foam comes out in sections using a spray foam cutting saw and oscillating multi-tool, then an industrial vacuum pulls the debris from the cavity. A standard three bed house takes one to two days. Stubborn closed cell foam may need dry ice blasting to make it brittle before removal.
04
Clean and verify
We clear every last fragment, check the cavity with the boroscope again, and re-test moisture levels. If any foam has bonded to the inner leaf we remove it with controlled sand blasting equipment. You get photos of the empty cavity before we close up.
05
Report and handover
We issue a completion report with before and after readings, photos and a description of the method used. That document is what your lender, surveyor or buyer's solicitor wants to see. We also talk you through reinstating ventilation and any replacement insulation.
Tools & methods
Tools and methods we use
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Spray foam cutting saw
Cuts cured foam into manageable sections inside the cavity without damaging the inner or outer leaf.
Oscillating multi-tool
Gets into corners, around wall ties and behind air bricks where a full saw will not reach.
Industrial vacuum
Pulls loose foam, dust and debris out of the cavity and into sealed containment for licensed disposal.
Boroscope camera
Lets us inspect the full cavity depth through a small access point and photograph the empty wall after extraction.
Moisture meter
Records wall and timber readings before and after the work, which is the evidence lenders want to see.
Dry ice blasting machine
Makes brittle work of foam that has bonded hard to brick, with less residue than abrasive methods.
Air scrubber
Keeps dust out of the rest of the house while we cut and vacuum, so you can stay in the property.
Real results
Before and after.
Mortgage rescued on a Scartho semi
Before
A buyer's surveyor flagged spray foam across two gable walls in a 1960s semi. The lender withheld the mortgage, the chain was two weeks from collapse, and the seller had no paperwork to show what had been installed.
After
We extracted the foam from both walls in a day and a half, cleaned the cavity and issued a report with photographs and moisture readings. The lender reinstated the offer within four days and the sale completed on the original timeline.
Damp stopped in an East Marsh terrace
Before
The owner had repainted a damp internal wall three times in two years. Moisture meter readings sat at 27 percent and the foam in the cavity was visibly wet when we inspected it with the boroscope camera.
After
After extraction and a full cavity clean, readings dropped to 12 percent within a fortnight. The wall dried out, the paint stopped blistering and the musty smell in the front room cleared.
Loft and cavity cleared in Humberston
Before
Foam had been sprayed across the loft floor and had crept down into the cavity over several years. The homeowner was worried about the timber roof tiles and the breathable membrane above the foam.
After
We removed the loft foam and the cavity foam in one mobilisation over two days. The membrane was intact, two timber sections needed treatment, and the roof void was left clear and ventilated.
Problems we solve
Problems cavity foam removal solves in Grimsby
Foam in a cavity rarely causes one problem on its own. It traps moisture, blocks airflow and hides what is happening behind the wall until a surveyor or a damp patch gives it away. These are the four issues we deal with most often across North East Lincolnshire.
Ask a pro →↗
Damp and condensation on internal walls
Once the foam is out, the cavity can dry. We re-test with a moisture meter and show you the drop, then advise on ventilation and breathable replacement insulation such as mineral wool or Thermafleece.
Reduced ventilation and hidden structural damage
We clear the cavity fully, check the wall ties and inner leaf with a boroscope camera, and reopen ventilation paths. Any damaged timber or membrane is flagged in the report so you can act before it spreads.
Voided building insurance
We remove the foam, document the work and give you a report you can send to your insurer. That record is usually enough to reinstate cover on normal terms.
Proof you can check
Accreditation and reviews
✓
CHAS AccreditationCHAS
✓
Constructionline RegistrationConstructionline
✓
SafeContractor ApprovalSafeContractor
✓
NVQ in Insulation RemovalCity & Guilds
✓
IOSH Managing SafelyInstitution of Occupational Safety and Health
Most Grimsby cavity jobs run between 1,200 and 3,500 pounds in 2026, depending on wall area, foam type and access. A three bed semi with straightforward access usually sits near the lower end. Closed cell foam that has bonded hard, or a wall that needs dry ice blasting, pushes the price up. You get a fixed quote after the free survey.
Yes. We cover the whole of North East Lincolnshire, from Grimsby Town Centre out to Cleethorpes, Immingham and Keelby. We remove open cell foam, closed cell foam and polyurethane foam from cavity walls, lofts and roof voids. If the foam has spread into more than one area we quote for the whole job in one visit.
It usually rescues the mortgage rather than harming it. Lenders refuse to lend when spray foam is present because it hides damp and structural problems. Once we extract the foam and issue our completion report with before and after moisture readings, most Grimsby buyers find their lender will proceed. Speak to your broker before you book so we can match the report to what they want.
A typical three bed house takes one to two working days on site. Small bungalows and single wall sections can be done in half a day, which is why same day cavity wall spray foam removal Grimsby is often possible. Larger detached properties in Humberston or Waltham with foam in multiple walls can run to three days. We confirm the schedule at survey.
More services
Related Services
Spray Foam Removal Near MeIf you are searching for spray foam removal near me in Grimsby, this is the same crew and the same kit. We cover every postcode in North East Lincolnshire and can usually survey within 48 hours of your call.Explore →
Same Day Spray Foam RemovalWhen a survey has just flagged foam and the chain is waiting, our same day service gets a technician out fast. Small cavity sections and loft patches can often be cleared and documented before the end of the day.Explore →
24/7 Spray Foam RemovalWater pouring through a foam-filled wall after a storm does not wait for office hours. Our 24/7 line covers Grimsby and the surrounding villages for emergency call-outs, with a full extraction booked in as soon as conditions allow.Explore →
Residential Spray Foam RemovalMost of our cavity work is residential. Terraces, semis and detached houses across Grimsby all get the same survey, extraction and reporting process, with dust control set up so you can stay in the property while we work.Explore →
Commercial Spray Foam RemovalShops, offices and rental blocks in Grimsby Town Centre often have foam in external cavity walls. We work around trading hours, hold CHAS and SafeContractor accreditation, and provide the documentation facilities managers need for their records.Explore →
Loft Spray Foam RemovalFoam sprayed into a loft can creep down into the cavity over time. We remove both in one visit, using a boroscope camera to check the wall below the loft floor before we close anything up.Explore →
Roof Spray Foam RemovalFoam on the underside of timber roof tiles traps moisture and causes rot. We strip it back, check the breathable membrane, and replace damaged sections before reinstating ventilation at the eaves.Explore →
Attic Spray Foam RemovalAttic foam is often the first thing a surveyor spots. We remove it, clean the timbers and test moisture content, then advise on mineral wool or Thermafleece if you want insulation that performs without trapping damp.Explore → Ready when you are
Book Cavity Wall Spray Foam Removal in Grimsby today
We survey free, quote the same day, and hold CHAS accreditation so your lender gets paperwork they accept. If a survey has just flagged foam and the chain is waiting, call us and we will tell you honestly how fast we can get there. Call 0147 246 0146.
Get a free survey 0147 246 0146 →
Request an appointment
Talk to our Grimsby team
Ring us on 0147 246 0146 between 8am and 6pm, Monday to Friday, and we will book a survey at a time that suits you. Most Grimsby postcodes get a same-week appointment, and urgent mortgage deadlines are usually accommodated within 48 hours. If you prefer, email info@apexfocussprayfoam.com with a photo of your loft and we will give you an initial view before we visit.
Call anytime0147 246 0146Email the officeinfo@sprayfoamremovalgrimsby.online
Office hoursOpen 24 hours · 7 days a week