Residential Spray Foam Removal in Grimsby clears failed spray foam insulation from lofts, rafters and roof voids so your home can breathe again. We handle home spray foam extraction in Grimsby for homeowners, buyers and lenders dealing with mortgage refusal, damp and condensation or a failed building survey. Our team has removed foam from Grimsby properties since 2022, using dry ice blasting, cutting saws and industrial vacuums. Free survey, fixed price, full clean-up.
Residential Spray Foam Removal in Grimsby is the controlled stripping of cured polyurethane foam from roof timbers, rafters and loft decks, followed by cleaning and reinstatement of ventilation. Spray foam is applied as a liquid and expands to fill every gap, so removing it is not a case of pulling it off by hand. We cut the bulk away with a spray foam cutting saw, then blast the residue off timber with a dry ice blasting machine or sand blasting equipment, and vacuum the dust with an industrial vacuum and air scrubber. A boroscope camera and moisture meter check what is happening behind the foam before we start.
Most Grimsby homes we survey were foamed between 2010 and 2018 under a government-backed insulation push. The problem is that closed cell foam seals a roof solid. Timber cannot dry, ventilation stops, and roof rot and timber decay follow. Lenders now flag it, so home spray foam removal Grimsby has become a standard part of buying or selling a property in North East Lincolnshire. If you have been told your mortgage is on hold until the foam comes out, you are in the right place.
Every residential job includes the survey, the removal, the clean-up and the paperwork. We do not charge separately for waste disposal, dust containment or the photographic record, because those are part of doing the job properly. If we find rot or damaged timbers, we will price the repair separately and only start it once you agree.
Boroscope camera and moisture meter inspection of the foam, timbers, membrane and ventilation. You get photos, a written scope and a fixed price the same day, with no obligation to book the removal with us.
Cutting saws, oscillating multi-tools and dry ice blasting to strip foam from rafters, roof decks and loft floors. Full protective clothing, respirators and an air scrubber keep dust out of the rest of the house.
Every exposed timber is checked for rot, timber decay and hidden structural damage. Early rot is treated on the spot, and anything structural is photographed and reported before we reinstate insulation.
We clear blocked vents, check breathable membrane coverage and restore airflow at the eaves and ridge. This is the step that stops the damp coming back and keeps the roof void dry through Grimsby winters.
All foam, dust and debris is bagged, sealed and removed for licensed disposal. Nothing is left in the loft, and we separate materials for recycling wherever the waste stream allows it.
Dated before-and-after photographs, a timber condition report and a written method statement. This is the pack lenders, surveyors and insurers ask for, and it is included as standard on every residential job.
We visit, inspect the loft with a boroscope camera and moisture meter, and check the foam type, coverage and timber condition. You get photos, a written scope and a fixed price the same day. Surveys across Grimsby and North East Lincolnshire usually take 45 to 60 minutes.
On the day, we lay dust sheets, seal doorways and set up negative air pressure with an air scrubber so dust and foam particles stay in the work area. Technicians wear full protective clothing and respirators. We protect lofts, carpets and loft hatches before anything is cut.
We cut the bulk of the foam away with a spray foam cutting saw and oscillating multi-tool, then blast residue off rafters with a dry ice blasting machine. Loose material goes straight into sealed bags and out through an industrial vacuum. A typical three-bed semi takes two to three days.
Once the foam is out we clean every timber surface, check for hidden structural damage and treat any early rot. You get a full photographic record of the roof void before and after, which is exactly what surveyors and lenders ask for.
We refit insulation boards or mineral wool, restore ventilation and make good the loft. You get a written summary, before-and-after photos and a workmanship warranty. Most customers are back to normal use of the loft the same day we finish.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Lifts foam residue and contamination off rafters without abrasion. It is our preferred method because it leaves the timber surface intact, which matters when the roof structure needs to stay sound.
Cuts the bulk of cured closed cell foam away in manageable sections. Used with an oscillating multi-tool for edges, corners and around cables or pipework where a saw cannot reach.
Captures foam dust and keeps the work area under negative pressure. Combined with sealed doorways and dust sheets, this is what stops foam particles travelling into the rest of your house.
Inspects behind the foam and measures timber moisture before we cut anything. This is how we find hidden structural damage and confirm whether rot has started, and it feeds straight into your written report.
Used selectively on brick, stone and heavy timber where residue will not shift by other means. It is aggressive, so we only bring it out with full containment and a clear reason.
Full PPE for every technician on site. Spray foam dust and isocyanate residues are not something to breathe in, and we treat containment as a non-negotiable part of the job.
A three-bed semi in Scartho had closed cell foam sprayed across the entire roof deck, installed by a previous owner. The buyer's lender refused to release funds and the sale stalled for six weeks. Timber moisture readings were high and early rot was visible on two rafters.
We removed all the foam in three days, treated the affected rafters and reinstated ventilation. The lender received our photographic record and timber report and lifted the retention within a week. The sale completed at the original price.
A coastal terrace in Cleethorpes had foam across the roof void and years of condensation on the back bedroom windows. The homeowner had replaced windows twice without solving it. Moisture meter readings on the rafters were well above safe levels.
We stripped the foam, cleaned the timbers with dry ice blasting and cleared the blocked eave vents. Within a week the window condensation had stopped and the musty smell in the back bedroom had gone. Total time on site was two and a half days.
A landlord with three rental properties across Grimsby discovered foam in every loft during a routine inspection. Two had early timber decay and one had a voided insurance policy because of the foam. All three needed clearing before the next tenancy cycle.
We surveyed all three in one visit and worked through them one at a time over three weeks. All foam was removed, decayed timbers were treated and each property received its own documentation pack. All three are now insurable and ready to let.
Foam that was sold as insulation has become one of the biggest hidden problems in Grimsby housing. These are the four issues we are called out to fix most often, and what happens if they are left alone.
Ask a pro →We remove the foam, document the timber condition and supply the photographic evidence and written method statement your lender needs. Most customers get their retention lifted within days of the report landing.
We strip the foam, treat affected timbers and restore ventilation so the roof can dry. Catching it early keeps the repair small, and our moisture meter readings show you exactly how far the damp had travelled.
We clear the foam, reinstate breathable membrane coverage and open up the vents. Air moves as the building was designed to, and the condensation and smell clear within days of the work finishing.
Removal and documented reinstatement gives you the evidence to go back to your insurer. We provide the method statement and photographs they ask for, and we can specify compliant replacement insulation at the same time.
Most Grimsby homes fall between £1,800 and £4,500, with a typical three-bed semi landing around £2,600. Price depends on roof size, foam type, access and how much timber repair is needed. Open cell foam comes out faster and cheaper than closed cell foam. We give you a fixed price after a free survey, so you know the number before any work starts.
Yes. We cover the whole of North East Lincolnshire, including Grimsby, Cleethorpes, Humberston, Waltham, New Waltham, Healing, Stallingborough, Immingham, Keelby and Habrough. We also work in the Grimsby neighbourhoods of Scartho, Laceby Acres, Great Coates, Little Coates, Bradley, Yarborough, East Marsh, West Marsh and Nunsthorpe. Surveys are usually booked within 48 hours.
Sometimes, but it depends on your policy and why the foam failed. If the foam was installed by a previous owner and your insurer has voided cover because of it, removal is usually your cost. If a surveyor or installer mis-sold the insulation, you may have a claim. We provide the photographic and written evidence you need to support a claim either way.
A standard loft in a Grimsby semi takes two to three days on site. Larger roofs, closed cell foam or significant timber repair can stretch to four or five days. We work in one continuous block rather than spreading it across weeks, so your loft is out of action for the shortest possible time. You get a firm schedule at the survey stage.
Spray Foam Removal Near MeIf you have just discovered foam in a loft you have bought, this is the fastest route to a survey. We cover every Grimsby postcode and can usually inspect within 48 hours, then give you a fixed price for full removal.Explore →
Same Day Spray Foam RemovalFor urgent cases, such as a lender deadline or a completion date that cannot move, we can mobilise a crew at short notice. Same-day slots depend on access and foam type, so call early and we will tell you honestly what is possible.Explore →
24/7 Spray Foam RemovalEmergency call-outs for water ingress through a foamed roof, storm damage or a collapsed section of foam. We answer the phone around the clock and can make safe the same night, with full removal booked in straight after.Explore →
Commercial Spray Foam RemovalWarehouses, workshops and commercial units across North East Lincolnshire often carry the same foam problems at a much larger scale. We bring the same containment and extraction methods, sized up for industrial roof voids and longer working hours.Explore →
Loft Spray Foam RemovalThe most common residential job we do. Loft foam blocks ventilation at the ridge and eaves, which is where rot starts. We strip it, clean the timbers and reinstate airflow so the loft can be used and insured normally again.Explore →
Roof Spray Foam RemovalFoam applied directly to the underside of roof tiles or slates traps moisture against the roof structure. We remove it carefully to avoid damaging tiles, then check battens and felt before reinstating breathable membrane coverage.Explore →
Attic Spray Foam RemovalAttic spaces in older Grimsby terraces are often tight and awkward. We use compact cutting tools and boroscope cameras to work in confined areas without damaging plasterboard or ceiling joists, and we remove every trace of foam.Explore →
Spray Foam Insulation RemovalA broader service covering foam applied to walls, floors and roof decks as well as lofts. If you are not sure what you have, we survey the whole property and tell you exactly which areas need removal and which can stay.Explore →Free survey, fixed price, full clean-up and lender-ready paperwork. We have been removing spray foam across North East Lincolnshire since 2022 and we answer the phone 24/7. Call 0147 246 0146 and we will book your survey, usually within 48 hours.
Get a free survey 0147 246 0146 →Ring us on 0147 246 0146 between 8am and 6pm, Monday to Friday, and we will book a survey at a time that suits you. Most Grimsby postcodes get a same-week appointment, and urgent mortgage deadlines are usually accommodated within 48 hours. If you prefer, email info@apexfocussprayfoam.com with a photo of your loft and we will give you an initial view before we visit.